Crazychris1871 0 Posted February 10, 2021 Share Posted February 10, 2021 Ok so I'm having a strange issue. Recently I had to change the right side output shaft seal on my 2015 Spark LS, manual trans. I took out the axle replaced the seal and put it all back together without any issues really. Since the trans had been leaking I went ahead and drained and replaced the gear oil in the trans as well. I used Valvoline full synthetic 75w90. I also put the battery on to charge while I went through the whole deal. After reinstalling everything and doing what I thought would fix it I went to crank it over only to get a series of clicks. No real crank. I went back through everything, checked the battery connections and such and I cant find anything out of sorts. Any body know what I may have screwed up? I included a video of the failed start for good measure.This is my main vehicle and I need to get her back up and running. Thanks in advance. Chris. 20210209_191549(1).mp4 Link to post Share on other sites
Crazychris1871 0 Posted February 10, 2021 Author Share Posted February 10, 2021 Update. I figured it out! Man I feel dumb. In my haste to get the job done, I didnt clean off the battery post it was just a case of poor connection. I'm sorry if posting this was a waste of time. Should have checked that out better. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now