deesdetfc 0 Posted March 9, 2019 Share Posted March 9, 2019 Hello, I've been scouring the internet and I cannot find a suitable answer to this issue. Please give some insight if you have any. First my 2014 Chevy Spark doesn't blow air at all, no temperature at the vents, no settings work whatsoever, tried all options. Tested all fuses I have been able to access from the fuse boxes. Two possibilities I have found that seem most likely: A/C fuse relay bad or blower motor resistor bad. For the A/C relay specifically I'm looking for help: when you go to the fuse box diagram under the hood it says A/C relay but it has dotted lines around it. The location has a plastic cover that is part of the fuse box and isn't removable. Literally there is no relay there. No one online seems to have any answer for this. Please can someone just tell me where this relay is? Please don't say just remove it it literally isn't there where is it? Please don't say just check something else can someone just answer specifically how to access the A/C relay?? I know people are used to older models having relays right there and don't understand why someone asking - please don't just blow off the question Link to post Share on other sites
ChevyBeat 28 Posted March 10, 2019 Share Posted March 10, 2019 Hi, Its basically the dotted part are directly soldered on the board of fuse-relay box. Now why, GM can only answer. I can suggest if you have doubt on ac relay, you need one person help. Turn on car, open the hood and the relay box and ask someone to turn ac on. You must be able to hear the click of relay activation. This is my presumption, I never tried this as never encountered this. But yes this is how relay works. Safety point - ensure parking brake applied. Pic is for reference, I took mine relay bord's just 2 week back as fog relay was loosing contact. Don't try to dismantle unless you are really very good to electronics. Link to post Share on other sites
Ray Dockrey 97 Posted March 12, 2019 Share Posted March 12, 2019 (edited) I know you said dont suggest something else but you are going down the wrong path. It won't be the blower motor resistor or ac relay. The resistor gets bypassed on the top speed. If it worked on the top speed but no the other then thats a sign of a bad resistor. AC relay only controls the ac clutch. There is also a ac fan relay, not sure that our cars have one, but it commands the cooling fan and again has nothing to do with the blower. The blower motor is on a separate circuit since it has to work whether AC or heat is on or just circulating air. Its either a blower fuse, switch or the motor has went out. Easiest way to start troubleshooting is to see if you are getting voltage at the motor and work your way back. Edited March 12, 2019 by Ray Dockrey Bobby MSME 1 Link to post Share on other sites
tma 0 Posted August 28, 2019 Share Posted August 28, 2019 did you work out what was wrong? I have the same problem. Link to post Share on other sites
abifano 0 Posted July 25, 2020 Share Posted July 25, 2020 My spark is having the same issue. They should do a recall on this. Mine used to come and go. Work for a few months then stop for a few days at a time. Now it hasn't blown at all for a month. Link to post Share on other sites
Dill 2 Posted August 27, 2020 Share Posted August 27, 2020 Ray is wrong. It can be the resistor or the blower motor itself. My resistor wires were so crispy and burnt no speed work. Replaced the resistor and wiring harness and all speeds worked again. It went out again and it was the same thing but I managed to get it so high speed worked but eventually the blower motor went bad. I replaced it and the resistor again and right now the resistor wires are bad again and the blower motor has to be dying as it didn’t blow as good as it used to and was starting to whine. I hate the AC in this thing and the transmission, should’ve got the manual one. 2014 with 150k. My 2007 Colorado has the same design flaw with the AC so must be a Chevy thing. Link to post Share on other sites
AandAMotorsports08 0 Posted August 30, 2021 Share Posted August 30, 2021 (edited) Literally today my high speed circuit has stopped blowing, the three lower speeds are fine. I haven't had time to investigate anything, we've been on the go all day and just parked the car long enough for me to write this. Is there a sperate fuse for running just the high speed circuit? If yes, where is it located? In the interior fuse panel or under the hood with the engine compartment fuses? Or somewhere else? Edited August 30, 2021 by AandAMotorsports08 Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now