Jump to content

njresler

Spark Member
  • Content Count

    161
  • Joined

  • Last visited

  • Days Won

    7

Everything posted by njresler

  1. SO, a little over a year hasn’t gone by since this happened and was fixed. Last night after turning my car off for a few minutes upon restarting it has happened again.
  2. I took it into the dealer they redid the update and fixed it
  3. I called the dealer they have no knowledge of such defect with the new update. But I'm going to call the service manager because I know him personally and see if he has any information.
  4. Disconnecting batter didn't work. It's either a fuse or wiring? Unless its software. It is strange that all of a sudden it tries to use a backup camera
  5. I did the update. But a month or so ago. Just now having issues. It's super frustrating. I don't want to pay the dealer for something simple. I'll try disconnecting the battery.
  6. Also no temp on the display. Wish I know what happened and also wish I actually had the backup camera
  7. Today my steering wheel controls stopped working? I turned off car a couple of times and hoped it would reset but no luck. Then when I put it in reverse now it tries to pick up back up camera which I don't have.
  8. Did you replace the tank? Or fix it some other way?
  9. Ok. I was just hoping to correct the high temps that are not good for the junk plastic they used for the coolant tank an who knows where else. Also thought it might be better for the engine.
  10. Anyone try lowering engine/coolant temps using additives like Lucas super coolant or Royal Purple's purple ice?
  11. I got 63k miles now and just replaced tires yesterday. I keep them inflated, rotated and balanced. Few minor issues since I got my 2013 2lt auto trams. Some I feel should be fixed by GM not me. Some have been fixed by GM. We all know the numerous recalls. I thought about starting a forum of complaints and suggested improvement. I do love my spark. But miss my 1996 chevy Truck (recently got rid of it). That truck only had minor and very fixable issues every arise. The one exception was an issue with the intake manifold gasket that the GM Orange coolant eats away. GM knows this and doesn't care
  12. i just cut off flush here and threaded in a brass barbed fitting. Reinforced with high heat epoxy.
  13. FYI. While waiting on GM to reply or fix and for the part to arrive I think I've found a nice work around. Maybe even (I hope) a permanent or better fix for the top intake nipple. I've replaced it with a brass barbed 5/16" to 3/8" threaded adapter (these specs maybe backward or reversed now) . I used some guesstimating to find the right part and got lucky. I was able to remove the cracked/broken nipple and drill out the now flat Union to the tank and thread the brass barbed nipple into it. I used some high heat epoxy around the union to insure good seal and strength. I'm hoping it works. Plan
  14. Thank you. I know it's super easy to do and I've found the part online for about $40 with shipping. While that is probably the course of action I'll have to take and the pretreatment with yours or some other conditioner will happen. I feel like this is a defect on GM's part and shouldn't be something I have to do or worry about. The All I'm going to do is worry and wait for the next part to fail in a couple years. I don't think the coolant tank should be something I change more frequently than my headlights.
  15. My coolant reservoir tank started with the top left intake getting brittle and breaking. So I fixed that. Now I am having it overheat/surge out due to what I imagine is high temperatures. But why? Then as I'm inspecting the tank it appears that now the bottom of the tank is changing color and becoming brittle. This seems to be a defect and I shouldn't have to pay for anything. I hope it doesn't cause damage to the a/c compressor, engine or anything else. I can change the tank myself but at $60-80 for the part and another $120 to have the dealer do it just seems ridiculous. . Where are you gett
  16. My coolant reservoir tank started with the top left intake getting brittle and breaking. So I fixed that. Now I am having it overheat/surge out due to what I imagine is high temperatures. But why? Then as I'm inspecting the tank it appears that now the bottom of the tank is changing color and becoming brittle. This seems to be a defect and I shouldn't have to pay for anything. I hope it doesn't cause damage to the a/c compressor, engine or anything else. I can change the tank myself but at $60-80 for the part and another $120 to have the dealer do it just seems ridiculous.
  17. My coolant reservoir tank started with the top left intake getting brittle and breaking. So I fixed that. Now I am having it overheat/surge out due to what I imagine is high temperatures. But why? Then as I'm inspecting the tank it appears that now the bottom of the tank is changing color and becoming brittle. This seems to be a defect and I shouldn't have to pay for anything. I hope it doesn't cause damage to the a/c compressor, engine or anything else. I can change the tank myself but at $60-80 for the part and another $120 to have the dealer do it just seems ridiculous.
  18. Yeah, mine was winter time so i noticed when the heater was cutting out and then not working. It was till just the reservoir that was Low and luckily still had some in the radiator and engine to circulate. I can't find the part online to order for myself and I was able to temporarily fix it with some self fusing silicone tape.
  19. That's a lot. To bad you don't know how to do it yourself. The belt is usually about $50 and the tensioner is less than the belt. 20-30 minutes of your time and it could have cost less than half. But, sometimes you have to let them do the work. Glad it's fixed.
  20. I've got 49k miles. So it's not covered. I sure feel it should be as its seems like a manufacturer defect. But they want to charge me $45 for part and $80 to install. I can install myself as its only two bolts and three hoses to remove and reattach. But it's ridiculous that it's an issue already.
  21. Is it the big "wheel" with grooves or a small wheel that's smooth. Or if you have a wheel with the fan attached directly to it. If it's the last it's probably the idler/clutch that's is part of the assembly and needs replaced.
  22. So the plastic stem/nipple for the hose to attach to the reservoir for the coolant return is cracking. I have fixed the leak for now but the tank is going to need replaced soon. The dealer is charging about $45 for the part after shipping. Is anyone else running into issues.
  23. So my heat has had a few blast of cold air then it would come back. But tonight it cut off and stayed off. I have 48k miles. I don't want to pay a dealer or mechanic for something that shouldn't be messed up so soon!
×
×
  • Create New...