MacintoshGuy 14 Posted October 30, 2017 Share Posted October 30, 2017 Exactly the same car from exactly the same factory just as a right-hand drive it's called a Holden with a different logo so the parts are direct fit....I also have the steering wheel airbag but that is still pending installation...Personally I think it gives the car a very unique look but it also just direct replacement. Link to post Share on other sites
Mr.tozzi 66 Posted October 30, 2017 Share Posted October 30, 2017 (edited) Interesting twist. Btw the holden spark has slightly different fog light inserts. I myself don't like to change badges, I believe that if the vin says a certain brand, model and trim the car should not carry badging that don't belong to it. But I'm not against changing body parts to better looking options when available. Edited October 30, 2017 by Mr.tozzi Link to post Share on other sites
MacintoshGuy 14 Posted October 31, 2017 Author Share Posted October 31, 2017 Mr Tozzi I have that part also with what looks like the driving lights and fog lights but I need to get the car up on a lift for that, I got lucky and found a junkyard near Perth that had a 2017 Holden Spark that got turned turtle so I was able to get most of the parts for next to nothing. The other thing I am looking into is the Chevy Philippines Spark headlights with the LED strip. I'm basically picking and choosing from various Spark's around the world to make a totally one off. Link to post Share on other sites
zamlawls 11 Posted October 31, 2017 Share Posted October 31, 2017 9 hours ago, MacintoshGuy said: Mr Tozzi I have that part also with what looks like the driving lights and fog lights but I need to get the car up on a lift for that, I got lucky and found a junkyard near Perth that had a 2017 Holden Spark that got turned turtle so I was able to get most of the parts for next to nothing. The other thing I am looking into is the Chevy Philippines Spark headlights with the LED strip. I'm basically picking and choosing from various Spark's around the world to make a totally one off. i have been searching for those for weeks. Link to post Share on other sites
Eric1984 16 Posted October 31, 2017 Share Posted October 31, 2017 10 hours ago, MacintoshGuy said: Mr Tozzi I have that part also with what looks like the driving lights and fog lights but I need to get the car up on a lift for that, I got lucky and found a junkyard near Perth that had a 2017 Holden Spark that got turned turtle so I was able to get most of the parts for next to nothing. The other thing I am looking into is the Chevy Philippines Spark headlights with the LED strip. I'm basically picking and choosing from various Spark's around the world to make a totally one off. If you get those headlights, can you please tell us where you found them or a part number please? Also, how hard was it to replace that front emblem? I'll be replacing mine with a black bowtie soon. Link to post Share on other sites
Cartern21 1 Posted November 2, 2017 Share Posted November 2, 2017 I want those headlight also! Link to post Share on other sites
Redorange 2 Posted November 3, 2017 Share Posted November 3, 2017 I’m going to have to stop by the dealership in Manila when we go there next year to check on those headlights. Link to post Share on other sites
MacintoshGuy 14 Posted November 4, 2017 Author Share Posted November 4, 2017 On 10/31/2017 at 4:51 PM, Eric1984 said: If you get those headlights, can you please tell us where you found them or a part number please? Also, how hard was it to replace that front emblem? I'll be replacing mine with a black bowtie soon. I will let everyone know a part number once I get it. I had to replace the whole backing piece also since the Holden Logo is round, I needed the upper grill with the round logo carrier. changing the whole upper grill and logo took maybe 30 minutes. Link to post Share on other sites
Eric1984 16 Posted November 15, 2017 Share Posted November 15, 2017 (edited) On 11/4/2017 at 6:15 AM, MacintoshGuy said: I will let everyone know a part number once I get it. I had to replace the whole backing piece also since the Holden Logo is round, I needed the upper grill with the round logo carrier. changing the whole upper grill and logo took maybe 30 minutes. I read on one of these forums that all you have to do to change the logo to a black one, is to remove the 2 10mm bolts and 2 push pins that are next to the hood latch. They said removing those would give you enough room to access the badge. Tonight, I did that but that piece seems like it's held onto the upper grill. Is there something I'm missing? EDIT: Nevermind. I decided to go back out and figured it out. Edited November 15, 2017 by Eric1984 Link to post Share on other sites
zamlawls 11 Posted November 16, 2017 Share Posted November 16, 2017 19 hours ago, Eric1984 said: I read on one of these forums that all you have to do to change the logo to a black one, is to remove the 2 10mm bolts and 2 push pins that are next to the hood latch. They said removing those would give you enough room to access the badge. Tonight, I did that but that piece seems like it's held onto the upper grill. Is there something I'm missing? EDIT: Nevermind. I decided to go back out and figured it out. are you going to put something to replace it? looks pretty empty... tfraser3 1 Link to post Share on other sites
tfraser3 10 Posted November 17, 2017 Share Posted November 17, 2017 looks great Link to post Share on other sites
Eric1984 16 Posted November 18, 2017 Share Posted November 18, 2017 (edited) On 11/15/2017 at 6:25 PM, zamlawls said: are you going to put something to replace it? looks pretty empty... Refer to the picture I posted. Edited November 18, 2017 by Eric1984 Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now