PickyBiker 0 Posted August 6, 2017 Share Posted August 6, 2017 Following the Chilton transmission removal instructions we drained the lubricant out of the manual transmission before pulling it. I found the correct manual transmission lube for GM manual transmissions, but what is the capacity of the 2014 spark manual transmission? It appears we did not actually need to do that, but we just blindly followed the book and since I have this out already, I don't want to put the original fluid back. Link to post Share on other sites
Bobby MSME 100 Posted August 6, 2017 Share Posted August 6, 2017 How about filling about the same amount of fluid as the old fluid amount + a tiny bit 5% more? Link to post Share on other sites
Mr.tozzi 66 Posted August 7, 2017 Share Posted August 7, 2017 It shouldnt be more than 2qts, usually they got a check plug on the side of the case above the drain plug, and you fill until it barely starts comming out of that hole. Link to post Share on other sites
PickyBiker 0 Posted August 13, 2017 Author Share Posted August 13, 2017 Yup, there was another plug above the drain plug. We filled it until it weeped back out the fill hole. It was about 2.5 quarts. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now