70-yenko-nova 12 Posted July 16, 2013 Share Posted July 16, 2013 check you messages bud.. i need lil help Greg. Link to post Share on other sites
Greg_E 211 Posted July 16, 2013 Author Share Posted July 16, 2013 I am having trouble getting to the PM system. I'll try from home later and see if it is better. Or just start a thread and more people might be able to help. Link to post Share on other sites
70-yenko-nova 12 Posted July 16, 2013 Share Posted July 16, 2013 /I just wanted whatever daytime running lights your running... and i was just going tot throw 55W hid bulbs in it. Link to post Share on other sites
Greg_E 211 Posted July 16, 2013 Author Share Posted July 16, 2013 I'm still running the stock daytime running light configuration (headlights at 75%), until I can get a service manual and figure out exactly how they are doing DRL, I won't be fooling with them. I think someone else had LED DRLs attached and really should be in a different thread since this one is about the stock fog lights. Link to post Share on other sites
70-yenko-nova 12 Posted July 17, 2013 Share Posted July 17, 2013 what are those 2 center lights on your grill called.. where can i get them. Link to post Share on other sites
Greg_E 211 Posted July 17, 2013 Author Share Posted July 17, 2013 Those were driving lights and come on with the high beams. Just bolt through the grill with a large washer on the back side. Not the best way to mount them but it worked until I hit the deer. Eventually I'll have a much better way of doing it with currently available lights, but the bumper/grille needs to come off and get modified and I haven't been able to take my car down long enough to do the work. Two ideas are to make a metal mount that rises up a little and bolt this to the bumper, the other is make a mount that extends out to the grille mounting screws along the edge and holds the light in place. The second option is most like the factory fogs with their little 3 arms holding them in place. The driving light thread is here: http://chevysparkforum.com/topic/388-driving-lights/ I'll probably try moving some of the posts over to that thread when I get some time and figure out how to move them. Link to post Share on other sites
JeffAVEWS 0 Posted July 18, 2013 Share Posted July 18, 2013 What great pictures! I am giong to make a dinghy out of my spark and this is what I need to help me mount the Blue Ox base plate. Link to post Share on other sites
Greg_E 211 Posted July 18, 2013 Author Share Posted July 18, 2013 The front bumper removal seems to be the first step in a lot of things we need to do. Link to post Share on other sites
Chris Bemis 5 Posted October 4, 2013 Share Posted October 4, 2013 Awesome job on the write up. Link to post Share on other sites
cj_hauser 0 Posted December 19, 2014 Share Posted December 19, 2014 Please can someone here help me. I got the fog light set but it did not come with the paperwork. I installed the lights. But now I am having an issue getting the BCM reprogramed. The dealership is saying it will take 1.5 hours at $115.00 an hour plus possibly $50-60 for a code that may be on the paper work. Has anyone else had these issues? Link to post Share on other sites
bluer101 241 Posted December 19, 2014 Share Posted December 19, 2014 Please can someone here help me. I got the fog light set but it did not come with the paperwork. I installed the lights. But now I am having an issue getting the BCM reprogramed. The dealership is saying it will take 1.5 hours at $115.00 an hour plus possibly $50-60 for a code that may be on the paper work. Has anyone else had these issues? You need the code from the seller. Link to post Share on other sites
SparkyRed 1 Posted December 23, 2014 Share Posted December 23, 2014 Please can someone here help me. I got the fog light set but it did not come with the paperwork. I installed the lights. But now I am having an issue getting the BCM reprogramed. The dealership is saying it will take 1.5 hours at $115.00 an hour plus possibly $50-60 for a code that may be on the paper work. Has anyone else had these issues? i paid $50 for the reprogramming, don't need code anymore Link to post Share on other sites
cj_hauser 0 Posted December 30, 2014 Share Posted December 30, 2014 SparkyRed Can you please tell me what dealership you had program your BCM. I am nearing the point of opening a case with the BBB. I mean $200.00+ is just ridiculous to turn on a factory fog light set. Link to post Share on other sites
Gossamer 50 Posted December 31, 2014 Share Posted December 31, 2014 Go to a different dealership. The dealership I go to was willing to install the whole kit and program it for $235. Don't bother with the BBB, they work hand in hand with GM. Link to post Share on other sites
Skids 108 Posted October 6, 2015 Share Posted October 6, 2015 Awesome tutorial greg, just in getting the front bumper off which is awesome and seems like not that much fun.. stinks they hid the horn behind it, makes it a pian to put in something louder..how/where to did you wire in the other set of lights you have hooked up on the grill? Link to post Share on other sites
johnbradshow 2 Posted October 15, 2015 Share Posted October 15, 2015 Has anyone installed HID on their headlights and/or fog lights?? I am planning to upgrade soon... salim 1 Link to post Share on other sites
suresh 0 Posted March 25, 2016 Share Posted March 25, 2016 I have spark fog lamp bulbs which is not in use because i m installing hids. If anybody needs let me know. Link to post Share on other sites
ANewSpark 11 Posted December 29, 2016 Share Posted December 29, 2016 On 10/5/2012 at 7:00 PM, Greg_E said: 95153828 turn/headlight/fog switch stalk 95933228 wiring harness 13500113 relay 19116043 fuse This may be obvious but if I wanted to run different lights, I'd only need these parts correct? Thanks Link to post Share on other sites
ANewSpark 11 Posted December 30, 2016 Share Posted December 30, 2016 Also I believe the new PN# for the wiring harness is 95400055, if anyone want to order. This is per Matt from ThatGMPartsGuy.com Link to post Share on other sites
Michael Butler 4 Posted January 18, 2017 Share Posted January 18, 2017 On Sunday, October 07, 2012 at 0:20 AM, barbara said: I read your post. Wow!! I never realized how labor intense it was. I bought my Spark las month and same as you, purch the fog kit. My husband was going to put it on, but it didn't come with instructions. Now after watching your install, I beleive it is worth the $150 the dealer will charge to do it. This week we had a alarm installed so I can have auto door locks. We had it conected to the trunk switch. Anyone have a better idea?? Also anyone heard when or where I might be able to get the navigation system? I'd like to switch it out with an original chevy one. I wasn't able to locate a xlt when I purch my LT. Thanks I did a write up on how to add a button for the back hatch it took my like 30 mins. Less then 10 bucks. No more key to open the hatch Link to post Share on other sites
ChevyBeat 28 Posted March 18, 2017 Share Posted March 18, 2017 Hi, I visited the Chevy service center today and asked for spare fog relay and fuse. Somehow these not available. But what my technician told that they don't do ecu modify for enabling fog. Any suggestions ? Link to post Share on other sites
ANewSpark 11 Posted March 18, 2017 Share Posted March 18, 2017 13 minutes ago, ChevyBeat said: Hi, I visited the Chevy service center today and asked for spare fog relay and fuse. Somehow these not available. But what my technician told that they don't do ecu modify for enabling fog. Any suggestions ? Please look at my post above for the new part number for the harness and where to order. Link to post Share on other sites
ChevyBeat 28 Posted March 18, 2017 Share Posted March 18, 2017 I have a different idea, I am going with a non GMA fog (LED projector with hallo ring) so will not be going with replacing light stack. Instead I will use a separate fog on-off switch next to headlight lever. So no GMA harness. Link to post Share on other sites
ANewSpark 11 Posted March 18, 2017 Share Posted March 18, 2017 What I did was bought everything BUT the fog lights and used my own lights. So now the inside will look OEM. Link to post Share on other sites
ChevyBeat 28 Posted March 23, 2017 Share Posted March 23, 2017 Hi, anyone have tried this type of fog lamps? I am more interested for fog lamp part. DRL is optional. http://www.ebay.in/itm/262761304998 Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now