stevesparky 20 Posted November 5, 2014 Share Posted November 5, 2014 I lost one of my keys. Has anyone replace a lost key or got an extra key? If so, what did you do? I see Spark Key Blanks on Ebay for about 25 bucks. What do i have to do? Thanks.. Link to post Share on other sites
WaltK 305 Posted November 5, 2014 Share Posted November 5, 2014 Unfortunately the Spark key is the stiletto type, which is enclosed within the fob, so the key has to be programmed, along with the fob, and then cut, so I would assume a trip to the dealer. When I took possession of my car, my dealer tried to sell me an insurance policy, just for the keys. When the dealer is involved, I am thinking big bucks. I have both sets, and have tried to buy an extra key, without the fob, no luck.!! I would talk to a locksmith, and see if something can be rigged, if not, then it's unavoidable. Good luck, and keep us informed, of what the resolution is. Retired old Gearhead 1 Link to post Share on other sites
Schaltz 27 Posted November 5, 2014 Share Posted November 5, 2014 Due to the chip in the key, your local dealer had to code it. Or else the car won't start. Link to post Share on other sites
stevesparky 20 Posted November 5, 2014 Author Share Posted November 5, 2014 So all I have to do is buy the key blank off ebay? Take it to my local locksmith and have it cut? Take it to my Chev Dealer and have the chip activated? Link to post Share on other sites
Schaltz 27 Posted November 5, 2014 Share Posted November 5, 2014 Yes :-) Link to post Share on other sites
stevesparky 20 Posted November 7, 2014 Author Share Posted November 7, 2014 (edited) Found this site for my key. http://www.keylessride.com/order/quote_key.asp?make=Chevrolet&remoteyear=2013&model=Spark&frid=EE803995 Wonder if it is OEM? Probably not. Anybody else have a source? And then this site. Says I can program the key myself if I have one working key.... which I do .http://www.autotransponder.com/2013_chevrolet_spark_transponder_key_1?gclid=Cj0KEQiA1eyiBRC-qI2VzKf0vaUBEiQAUiZ3xDxr0IZMHtmRumnvZUg-MDywnJhHhPjgXo3KMHPzyqAaAgWo8P8HAQ Anybody have any experience in this area of programing the key yourself? Edited November 7, 2014 by stevesparky Link to post Share on other sites
Angrybird12 61 Posted November 7, 2014 Share Posted November 7, 2014 I know on my Camaro if you have one working key you can program a new key by inserting the old key in the ignition and turning it to the run position without starting the car, then turn it off and within 10 seconds insert the new key and turn it to the run position. Do not start the car either time. I don't know if this would work on the spark but give me a day or so and I will find out. Link to post Share on other sites
Angrybird12 61 Posted November 7, 2014 Share Posted November 7, 2014 Just talked to the dealer and they said the same method I used on my Camaro should work on the spark Key. But he wasn't 100% certain. Link to post Share on other sites
stevesparky 20 Posted November 7, 2014 Author Share Posted November 7, 2014 Thanks. I am going to talk to my local locksmith. He has ordered some Spark key blanks, to stock his shelves. Said they would be in about 2 weeks. I am not committed to buy from him, but he is a good guy. Link to post Share on other sites
bobj 5 Posted May 1, 2015 Share Posted May 1, 2015 i fought this battle for a long period , no luck ,finally contacted main chev hq said they cant do ,,as agreed with dealers to let them handle ,,but you must find dealer with key cutter ,maker and employee that knows how to do it ,,found it was far cheaper to order spare keys thru chev dealer than anywhere else , you must prove ownership and have vin no.to order right key blank ,then dealer cuts and programs key. i got 5 done at Jim Sigel, Chev-honda-nissan dealer in grants pass ,oregon,, a big dealer and have the eqpt and personel to do it . found them cheaper than any other source and no one in my area would cut a blank key,, gave all kind of reasons why not ,,Sigels were quick effecient and reasonable ,,blanks cost 8.50 each, and programming and cutting is 16.00 each ,,i got 5 done and all work super ,dealer is quick ,courteous and effecient .good place ,i done mine there after ordering by phone and making appt . and go in,, must furnish original key or keys for the operation. Jim Sigel Chev,,,1601 ne 7th st ,grants pass ,or,97526 541 476 0811 and 800 452 1455 ask for Gordon ,parts mgr. Link to post Share on other sites
Miraj Choksi 16 Posted May 1, 2015 Share Posted May 1, 2015 Had the same problem with my other car which had a chip so I asked the dealers but they were charging too much instead I found a shop who made digital keys all they do is tale your cars I'd and make the key so try finding a person who can do this. Link to post Share on other sites
Retired old Gearhead 201 Posted May 1, 2015 Share Posted May 1, 2015 I am assuming you have the remote fob system? Rather than taking a chance with 'rigging' something why not just get the dealer to order the 'fob' key, program it and that way you won't have any possible issues like locking yourself out, etc. If you have the basic 'key only' you may be able to get a generic and have it programmed. Link to post Share on other sites
eddiesmith 0 Posted March 21, 2016 Share Posted March 21, 2016 I lost one of my keys. Has anyone replace a lost key or got an extra key? If so, what did you do? I see Spark Key Blanks on Ebay for about 25 bucks. What do i have to do? Thanks.. It's possible to get a duplicate key for it even though you don't have the original. Just call a Locksmith and for the right price, he'll take care of it for you. I once lost the key to my BMW and it took less than 20 minutes for the Cicero Locksmith to make me a new key. Link to post Share on other sites
jaksonlee 0 Posted June 1, 2016 Share Posted June 1, 2016 I lost one of my key/FOBs and need to replace it.I did this once before and it's expensive and irritating. Cost me lots.I see I can buy a fob for about $70.00 by Davie Locksmith,they are such commendable locksmiths.They are residential,commercial and automotive locksmiths. Link to post Share on other sites
yello 0 Posted February 10, 2017 Share Posted February 10, 2017 The easiest way to start will be finding a locksmith or a dealer. So, if you don`t have much money to pay a dealer or a locksmith, you can search on forums how to deal with that. In my opinion, the hardest but again the least resourceful one. You can`t cut the key, however. So, you need to take blanks to a locksmith and they will copy the pattern. Usually, you won`t pay much, around 20 dollars or so. Dealer, however, will charge you for more than that. If you are interested, i can suggest good emergency locksmith Toronto service. He helped me a lot with a car and house rekeying. By the way, he can reprogram the car no worries. Link to post Share on other sites
Lary Engle 0 Posted February 10, 2017 Share Posted February 10, 2017 (edited) I'm a locksmith. The Chevy Spark is very easy to program yourself as long as you have an existing programmed key. Read the directions in your owner's manual. If you choose to buy a key off Ebay or other sites, my shop would charge to cut the key( which we do for free when it's our key blank ) and there is no warranty. Lot's of people come to our shop with keys bought some where else and they usually end up paying more in the end. Many time the keys are a cheap knockoff and they won't program or didn't come with the chip inside. Edited February 10, 2017 by Lary Engle repeated wording Link to post Share on other sites
airgwar15 0 Posted March 1, 2017 Share Posted March 1, 2017 I replaced 2013 Chevy Spark Ignition key!!!! 1. I bought a replacement key from replacemyremote.com for $22. 2. I then had a locksmith cut it from the sole key I had. 3. Put existing working key in ignition and turned on until all of warning lights and gauges were on without starting engine. Leave in for 10 seconds. 4. Insert newly cut key and boom, we have ignition baby! 5. $22 for key $2 to cut. $24 out of pocket. Not bad! Link to post Share on other sites
Bobby MSME 100 Posted April 14, 2017 Share Posted April 14, 2017 On 2/28/2017 at 9:24 PM, airgwar15 said: I replaced 2013 Chevy Spark Ignition key!!!! 1. I bought a replacement key from replacemyremote.com for $22. 2. I then had a locksmith cut it from the sole key I had. 3. Put existing working key in ignition and turned on until all of warning lights and gauges were on without starting engine. Leave in for 10 seconds. 4. Insert newly cut key and boom, we have ignition baby! 5. $22 for key $2 to cut. $24 out of pocket. Not bad! That link gives me an error. Here is the corrected link: http://replacemyremote.com/products-by-make/chevrolet.html Link to post Share on other sites
robertsteller 0 Posted August 8, 2018 Share Posted August 8, 2018 I found it useful but i have got one from locksmith atlanta ga , all done by their own and it ends up spending $28 for that. But in future i will use this link and do it by own. Link to post Share on other sites
DemetriaGuynes 0 Posted April 22, 2021 Share Posted April 22, 2021 It's easy to program chevy key by yourself but i recommend to hire locksmith or dealership. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now