Jump to content

Sparktacus2017

Spark Member
  • Content Count

    9
  • Joined

  • Last visited

Everything posted by Sparktacus2017

  1. Ok not easy but done lol. The driver side trim piece have 4 screws one in each corner and two small easy clips in the front. Idk how to get to the back two screws but the dash plastic is softer than the trim. I got lucky and slowy pulled and pryed it of and broke the dash where the screw was(wasnt going to put that one back anyway). The passanger side has 8 screws 4 ontop and 4 on bottom and agian i couldnt get the top most outside out so again slowly pulled and it pulled the screw out the dash. And just incase u want to know about the stearing wheel. Theres
  2. Im trying to paint the interior pieces in my spark. I want all the silver to be red. I know how to remove the steering wheel piece, and the door pieces. But i cant find all the screws or clips on these pieces. Can anyone tell me how many there are and where they are located.
  3. Ok so i bought the chevy sonic radio harness and it worked great. It even supplys a reverse wire for back up cameras and keeps all factor radio features i wanted to save (turn signals, door/warning chimes, and keeping radio on till u open the door) but not onstar
  4. Yes as I stated before I found that kit before but I don't need the dash pieces. I already emailed customer support to see if they can sell it without the dash pieces and they replied no. I'm mainly looking to see if they Sonic wiring harness will work in the spark.
  5. Actually I just ran mine last week and I found that if you remove the plastic trim we're going to run the amp wire under the carpet anyway you can release the hood pop cable from the handle and remove the rubber grommet that's in the wall behind the clutch and run your amp wire that rubber grommet with the Hood pop cable then just replace the cable back to the handle when you're done it comes out in the engine bay through the fire wall behind the ECU. Sorry I didn't reply this earlier or with pictures if anybody wants pictures ask and I will add them.
  6. Hello I own a 2013 Chevy Spark LS. I was looking to replace my factory head unit with an aftermarket. I would like to retain the door chimes but don't care about the OnStar. I have been looking for wiring harnesses and I have come across two of them. I found the one everybody recommends on crutchfield.com that says it fits my car but comes with all the plastic trim pieces that i have already. But I also found one that fits a 2013 Chevy Sonic that does not come with the trim pieces on walmart.com. I keep searching online and every retailer selling this kit says it does not fit the spark but the
  7. Can you tell me what wiring diagram you used? i have been trying to find one and all the ones i have found say power is a red/brown wire and i don't have that wire i have solid red and a red/blue wire. thanks for the help
  8. Hey new to the fourm and now own 2 sparks lol but im running an amp aswell just wondering were u ran your amp wire in the 5 spd? Thanks
×
×
  • Create New...