Jump to content

SparkDriver

Spark Member
  • Content Count

    5
  • Joined

  • Last visited

  1. My 2014 LT with manual locks has an electric lock for the hatch. There is an lock/unlock button on the dash to the left of the steering wheel. Note that this only unlocks the hatch so it can be opened by the trunk release - it does not "pop" it open. I installed power lock actuators to the 4 doors and keyless entry and was able to tie in the existing hatch lock actuator (I just tapped into the lock/unlock switch on the dash).
  2. I can report that the wiring guide was accurate and I was able to tie in everything for my keyless entry. The wire plugs to the BCM are a bit hard to get to, but using posi-taps made it easier.
  3. Yes you can. I just did this in my 2014 LS. I used the Metra 99-3309B double din install kit. It retains the door chimes and OnStar. I put in a JVC KW-V320BT, swapped all speakers (stock speakers are cheap paper cones), and added a Bazooka Tube subwoofer. Works great!
  4. After having my Spark for a year and a half I finally got around to adding power locks and keyless entry to my 2014 LS. I didn't have much problem installing everything, and I now have progressive unlock and even got the trunk lock/unlock tied in. I'd like to tie in the horn, ignition, dome, and parking lights, but I cannot seem to find any information on the location of the wires/harnesses for these. I found a list of wire colors and basic locations for the car (e.g. ignition and horn is in the ignition harness, parking and dome lights are in harness by fuse block), but so far I have not b
×
×
  • Create New...